Request a Quote (337) 573-4406 sales@patriotfts.com
Stainless steel bellows expansion joints

Home / Products / Metal Expansion Joints / Stainless Steel Expansion Joints

Stainless Steel Expansion Joints and Bellows Materials The right alloy for a thin-wall bellows.

Most metal expansion joints use stainless steel bellows, but the grade matters. A bellows wall is thin, so there is no corrosion allowance. Material is chosen for media, temperature and chlorides as much as for pressure.

0Corrosion allowance in a bellows
321Common general-purpose grade
316LBetter pitting resistance
625Chloride and high-temperature service

Why bellows material matters

Bellows are formed from thin sheet so they can flex. That thinness means a small amount of pitting or cracking goes straight through the wall. Bellows also carry high flexing stress, which makes them more sensitive to stress corrosion cracking than the heavier pipe around them. The bellows alloy is often a higher grade than the piping for this reason.

Metal expansion joint parts including the bellows, flanges and collars
The bellows is the wetted, flexing part, so it gets the most attention in material selection.

Bellows material table

MaterialTypical useNotes
321 stainless steelGeneral process, steam, hot gasTitanium-stabilized, a common general-purpose bellows grade for elevated temperature
304 stainless steelHVAC, water, utilityEconomical, good general corrosion resistance
316L stainless steelProcess, mild chemical, coastal airMolybdenum improves pitting resistance; low carbon for welding
Alloy 625Chloride-bearing water, marine, high temperatureNickel-chromium-molybdenum; strong resistance to chloride stress corrosion
Alloy C-276Severe chemical serviceBroad resistance to acids and chlorides
Alloy 400Seawater, some acidsNickel-copper alloy

Material suitability depends on concentration, temperature, contaminants and cycling. Patriot FTS confirms the bellows material for your service at quote. The alloy selection guide covers the same alloys for metal hose.

Chlorides and stainless steel

Austenitic stainless steels such as 304, 316L and 321 can suffer chloride stress corrosion cracking when chlorides, tensile stress and elevated temperature combine. Sources include cooling water, brackish or produced water, hydrotest water left in the line, chloride-bearing insulation and marine air along the Gulf Coast. Where those are present, nickel alloy bellows such as alloy 625 are commonly specified, and hydrotest water should be drained and dried.

Fittings and hardware

  • Flanges and pipe ends: carbon steel for most utility and hydrocarbon service, stainless where the piping is stainless.
  • Liners: usually the same family as the bellows.
  • Rods, hinges and covers: carbon or stainless steel, painted or coated for the environment.
  • Documentation: material test reports for bellows and fittings on request.

Specifying materials

Tell us the media and concentration, design and upset temperature, chloride content if known, the outside environment and the piping material. If the project specification names a bellows alloy, include it.

Ready to quote? Use the expansion joint quote builder to enter movements, pressure and temperature and email the specification, or call (337) 573-4406. Bellows design, movement capacity, ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

What is the most common bellows material?
Austenitic stainless steels such as 321, 304 and 316L are the most common bellows materials.
When should I use an alloy 625 bellows?
Where chlorides, high temperature or severe corrosion would put stainless steel bellows at risk, such as brackish or chloride-bearing water.
Why is the bellows a higher grade than the pipe?
The bellows wall is thin and highly stressed by flexing, so it has no corrosion allowance and is more sensitive to cracking.
Can the flanges be carbon steel with a stainless bellows?
Yes. Carbon steel ends with stainless bellows are common when the piping is carbon steel.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.