Request a Quote (337) 573-4406 sales@patriotfts.com
Braided stainless metal hose with welded flange built by Patriot FTS in Louisiana

Home / Tech Reference / Metal Hose Selector

Metal Hose Selector Find the right hose.

Compare every catalog metal hose construction at your design pressure and temperature, lightest first, then draw it or send it to Patriot FTS for a quote. Free, no login.

Service conditions
Hose and braid
Installation limits (optional)
Show

Patriot FTS Metal Hose Selector

Result

Catalog constructions

Draw the suggested hose

Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.

How the hose selector works

  1. Enter the service. Nominal size, design pressure, design temperature and whether the hose flexes in service.
  2. Narrow the alloys. Leave hose and braid on Any to compare every alloy, or pick the alloy your media calls for.
  3. Add limits. If the space only allows a certain bend radius or outside diameter, enter it and the tool removes constructions that will not fit.
  4. Draw it or send it. Open any qualifying row in the hose drawing generator, or email the results to Patriot FTS for a quote.

Method

For every catalog construction the tool takes the working pressure at 70°F and multiplies it by the braid temperature derating factor at your design temperature. A construction qualifies when that rating is at or above your design pressure, the braid is rated at the temperature, and it fits any bend radius or OD limit you entered. The suggestion is the lightest qualifying construction, the same rule the drawing generator uses on Auto.

Rating at T = working pressure at 70°F × braid factor at T
Qualifies when rating at T ≥ design pressure

Ratings are for the hose and braid only. End fittings, flanges and welds can set a lower assembly rating, which you can check with the assembly rating checker. Choose the alloy for the media first; see the alloy selection guide and the chemical hose selection guide.

Frequently asked questions

Which hose alloy should I choose?
316 stainless is the default for most process, utility and steam service. Higher alloys such as Alloy 625, Alloy C-276 and Alloy 400 are used for specific corrosive media, and bronze is used in some water and refrigerant service. Start from the media and temperature, then confirm the choice with Patriot FTS.
Why does the rating drop at temperature?
The braid carries the pressure load, and braid wire loses strength as it gets hotter. The derating factor for the braid alloy at your temperature is applied to the 70°F rating.
Static or dynamic, which applies?
Static means the hose is bent once at installation and stays put. Dynamic means it flexes in service, such as constant vibration or a traveling loop. Dynamic service uses a larger minimum bend radius.
Does a qualifying row mean the assembly is rated at that pressure?
No. The selector rates the hose and braid. The assembly rating is the lowest of the hose, braid, end fittings and welds at temperature, and Patriot FTS confirms it on the quote.
Can I save my inputs?
Yes. Copy link stores every input in the web address so you can reopen it later or send it to a colleague.

Related tools and guides

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.