Request a Quote (337) 573-4406 sales@patriotfts.com
Braided metal hose in water service

Home / Tech Reference / Water Hammer Calculator

Water Hammer Calculator Know the surge before the valve slams.

Estimate wave speed, critical closure time and pressure surge from a closing valve, then compare the peak against braided metal hose ratings at temperature. Free, no login.

Fluid
Pipe run upstream of the valve
Flow change
Hose in the line

Patriot FTS Water Hammer Calculator

Estimated surge

Surge against valve closure time

Slower closure than the critical time 2L/a reduces the surge in proportion.

Peak pressure against the hose rating

Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.

How the water hammer estimate works

When a valve closes, the moving column of liquid has to stop. The pressure wave that results travels back up the pipe at the wave speed, reflects and returns. If the valve closes faster than one round trip, the full Joukowsky surge develops. If it closes more slowly, the surge falls roughly in proportion to the closure time.

a = √[ (K/ρ) ÷ (1 + K D ÷ E e) ]   (Korteweg wave speed)
Critical time tc = 2L ÷ a
Rapid closure (t ≤ tc): ΔP = ρ a Δv   (Joukowsky)
Slow closure (t > tc): ΔP = 2 L ρ Δv ÷ t

  • K fluid bulk modulus, ρ density, D pipe inside diameter, e wall thickness, E pipe elastic modulus (29 × 106 psi carbon steel, 28 × 106 psi stainless).
  • Δv is the change in velocity in the pipe, from the flow before and after the valve moves.
  • Peak pressure is the operating pressure plus the surge, compared with each catalog hose construction at temperature.

This is a screening estimate for a single pipe run. It ignores friction, entrained air, column separation and the effect of valve characteristics, and a real closure is rarely linear. Pump trips, check valve slam and long pipelines call for a transient analysis. Metal hose can absorb some shock, but a surge that approaches the hose rating calls for a heavier construction, a slower valve or a surge suppressor. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

What is water hammer?
A pressure surge caused when a moving liquid column is stopped or changed quickly, usually by a valve closing or a pump tripping. The surge can be many times the operating pressure.
How do you calculate water hammer pressure?
For rapid closure use the Joukowsky equation: surge equals fluid density times wave speed times the change in velocity. For steel pipe and water the wave speed is roughly 4,000 to 4,700 ft/s, so each 1 ft/s of velocity stopped adds about 50 to 60 psi.
What is the critical closure time?
Twice the pipe length divided by the wave speed: the time for the pressure wave to travel to the far end and back. Closing faster than this produces the full surge.
Can a metal hose absorb water hammer?
A hose flexes slightly, but it should not be relied on as a surge suppressor. The peak pressure should stay inside the hose rating at temperature.
Is this a full surge analysis?
No. It is a screening estimate for one pipe run. Pump trips, check valve slam and long or branched systems need a transient analysis.

Related tools and guides

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.