Request a Quote (337) 573-4406 sales@patriotfts.com
Installed metal hose U-loop assembly built by Patriot FTS in Louisiana

Home / Tech Reference / Installation Checker

Installation Checker Install it once. Install it right.

Walk through the metal hose installation rules with a wrong-and-right sketch for each, check the bend radius against the catalog minimum and print an installation record. Free, no login.

Installation record
Bend radius check

Service

Notes

Patriot FTS Installation Checker

Summary

Bend radius

Walk the installation

Check each item on the installed hose and choose Yes, No or N/A.

Installation record

Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.

How the installation checker works

Most early metal hose failures trace back to installation: a bend tighter than the hose allows, a twist put in during make-up, axial movement the hose was never meant to take, or pipe weight hanging on the assembly. The checker walks through those rules one at a time with a wrong-and-right sketch for each.

  1. Record the hose. Tag, location, date and installer.
  2. Check bend radius. Pick the size, alloy and construction, then enter the radius you measured. The tool compares it to the catalog static or dynamic minimum bend radius.
  3. Walk the installation. Answer Yes, No or N/A for each of the ten rules.
  4. Keep the record. Print it for the work package, or email it to Patriot FTS if something needs a different assembly.

The rules follow the metal hose installation and bend radius guide, which also covers the straight neutral zone of about 2 in. at each end fitting. Bend radius, construction and ratings are confirmed by Patriot FTS at quote.

Inspecting hose that is already in service? Use the inspection and retest planner.

Frequently asked questions

What is the difference between static and dynamic bend radius?
Static minimum bend radius applies to hose that is bent once at installation and then stays put. Dynamic minimum bend radius is larger and applies to hose that flexes or moves in service.
How do I measure the installed bend radius?
Measure to the centerline of the hose at the tightest part of the bend. A template or a flexible rule laid along the hose works well.
Why can a metal hose not take axial movement?
Corrugated metal hose is designed to flex sideways. Compressing or stretching it in a straight line works the corrugations and the braid in a way that can shorten its life quickly. Movement is taken as lateral offset or in a loop instead.
What should I do if an item fails?
Correct it before the line goes into service. If the hose length, construction or configuration is wrong for the installation, email the record to Patriot FTS for a correctly sized replacement.
Does the checker replace the system test?
No. It is a visual and dimensional checklist. Pressure and leak testing still follow the system test procedure.

Related tools and guides

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.