Request a Quote (337) 573-4406 sales@patriotfts.com
Braided metal hose assembly with a stainless identification tag

Home / About / Inspection and Recertification

Hose Inspection, Tagging and Recertification Know what is in service.

We inspect, retest, tag and recertify hose assemblies in our Youngsville, Louisiana shop or at your site, including hose we did not build, and keep a register so retests do not slip.

Any makeIncluding hose we did not build
ShopOr at your site
RegisterRecurring retest program
24/7/365On-call service and emergency support

What we do

  • Inspect hose assemblies already in service.
  • Retest them to the pressure and procedure your program calls for.
  • Tag each assembly so it can be identified in the field.
  • Recertify assemblies that pass, with reports for your records.

We do this for hose we built and for hose we did not, in our shop or at your site. Testing is done by NDT Level II personnel under our ISO 9001:2015 quality system.

What an inspection checks

Most hose gives warning before it fails. An inspection looks for:

  • Cover and braid damage. Cuts, abrasion, broken or loose braid wires, and blisters or soft spots on rubber hose.
  • Kinks and crushing. Signs the hose has been bent past its minimum bend radius or flattened.
  • Fittings. Corrosion, cracked welds, damaged threads or sealing faces, and fittings that have moved on the hose.
  • Leaks at the fittings or through the hose wall.
  • Identification. Whether the tag and markings are still readable and match the service.

Industry guides cover specific hose, such as API’s recommended practice for the inspection, care and use of rotary, vibrator and cement hose. The installation guide covers the routing mistakes that shorten metal hose life.

Recurring retest programs

For plants, rigs and fleets with many assemblies, we can run a recurring program. We keep a register of your hose, with each assembly’s identification, location and service, its last test and its next retest date, so assemblies come back for inspection on schedule instead of when someone remembers.

When a hose fails

An assembly that fails inspection or retest is taken out of service and documented. We can build the replacement in our shop to the same or an improved specification, pressure test and tag it, and add it to your register. When a failed hose leaves a line down, call our on-call team; see emergency hose fabrication.

Getting started

  • How many assemblies
  • Hose types and sizes
  • Shop or on-site work
  • Retest interval or procedure
  • Existing records, if any
  • Reports you need

Frequently asked questions

Will you recertify hose you did not build?
Yes. We inspect, retest, tag and recertify hose assemblies from any maker, as well as our own.
Can you inspect hose at our site?
Yes. We inspect and recertify hose in our Youngsville shop or at your site.
Do you offer a recurring hose retest program?
Yes. We keep a register of your hose assemblies with their last test and next retest date, and bring them back for inspection on schedule.

Sources

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.