Steam hose types
ISO 6134 splits rubber steam hose into two types. Type 1 is low-pressure hose rated to 6 bar (about 87 psi). Type 2 is high-pressure hose rated to 18 bar (about 261 psi) on saturated steam at 210°C (410°F). Our steam hose is rated 250 psi, up to 450°F, for saturated and superheated steam. Published Type 2 hose data, for example, lists 261 psi on saturated steam and 250 psi on superheated steam to 450°F.
ARPM publishes IP-11-1, a guide to the use, testing and inspection of steam hose, which is worth keeping with your hose program.
Couplings and clamps
Steam hose needs steam-rated fittings. The usual choice is a ground-joint coupling held by an interlocking (Boss-style) clamp that grips the hose and locks onto the coupling stem. Typical instructions for a two-bolt interlocking clamp:
- Tighten in sequence with a torque wrench, one full turn per bolt, alternating.
- Dry bolts. Do not lubricate the nuts or bolts; it affects clamp performance.
- Don’t reuse clamps. The bolts can be retorqued, but clamps and bolts are not meant to be reused.
- Steam-approved parts only. Never put an item not approved for steam into steam service.
Camlocks are not a substitute: coupling makers commonly state cam-and-groove couplings are not suitable for steam.
Safety in service
It is not unusual for clamps to loosen on steam hose, so check and retighten them regularly. Inspect and retest assemblies on a regular schedule as the hose maker recommends. Retire hose with cover blisters, soft spots or kinks. For permanent high-temperature lines, consider stainless metal hose, which does not age the way rubber does.
What we need
- Steam pressure and temperature
- Saturated or superheated
- Size and length
- Coupling type and threads
- How often the hose is moved
- Quantity
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

