
Home / Tech Reference / Overall Length Calculator
Overall Length Calculator Order the right length the first time.
Turn live hose length into overall length, or work back from the gap in your pipe, with fitting takeouts, NPT thread makeup, gaskets and weld root gap included. Free, no login.
Patriot FTS Overall Length Calculator
Result
Assembly and installed gap
Length build-up
NPT thread makeup reference
Hand-tight engagement plus wrench makeup, from the ASME B1.20.1 thread dimensions. Male NPT ends add this length to the installed gap.
Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.
How overall length is built up
The overall length (OAL) of a straight hose assembly is the live hose plus the two end takeouts. The takeout is everything that is not flexible: the fitting itself and the braid collar where the braid is welded to the fitting. Flanged OAL is measured face to face, threaded OAL is measured from the end of each fitting.
OAL = live length + takeout1 + takeout2
Installed gap = OAL − thread makeup (male or female NPT) + gasket (flanged) + root gap (weld)
- Flanged ends. The gap is face to face of the mating flanges, so each gasket adds to the gap. Spiral wound gaskets are usually about 0.175 in. after compression; sheet gaskets are usually 1/16 or 1/8 in.
- NPT ends. A male nipple threads into the mating port by the hand-tight engagement plus about three turns of wrench makeup. Measure the gap to the face of the mating port. For a female coupling, measure to the end of the mating male pipe.
- Weld ends. Measure to the pipe end. The root gap left for the butt weld adds to the gap.
- JIC, camlock, tri-clamp and grooved ends. Measure to the seat or coupling face. The tool adds no allowance; grooved couplings leave a small end gap that Patriot FTS confirms at quote.
Working back from a measured gap is the common case in the field. Enter the gap, choose the ends and the tool gives the OAL to order and the live hose length that results. If the live length comes out short for the movement you need, check it with the Live Length Calculator. Takeouts here are reference values for drawing; fitting lengths, ratings and dimensions are confirmed by Patriot FTS at quote.
Frequently asked questions
How is metal hose overall length measured?
What is a takeout on a hose assembly?
How much thread engagement should I allow for NPT ends?
Should I include the gasket when measuring a flanged gap?
Can I start from the space I have in the pipe?
Related tools and guides
- Metal Hose Selector
- Live Length and Bend Radius Calculator
- Expansion Loop Sizer
- Assembly Rating Checker
- Hose Quote List Builder
- Spec Sheet Builder
- Installation Checker
- Inspection and Retest Planner
- Flow Velocity and Pressure Drop Calculator
- Media Compatibility Checker
- Pump Connector Sizer
- Flex Service Screening
- Fitting and Connection Finder
- Saturated Steam Calculator
- Unit Converter
- Braid Burst Calculator
- Water Hammer Calculator
- Expansion Joint Quote Builder
- Stud bolt length calculator (Patriot Bolt)
- Hose Drawing Generator
- How to specify a metal hose assembly
Need it fast?
Call our on-call team any time, day or night, or send your specs online.
(337) 573-4406 Request a Quotesales@patriotfts.com