Request a Quote (337) 573-4406 sales@patriotfts.com
Finished custom metal hose assemblies ready to ship

Home / Tech Reference / How to Specify a Metal Hose Assembly

How to Specify a Metal Hose Assembly Spec it right.

The eight things we need to quote a custom metal hose assembly correctly the first time, and why each one matters.

8Details for an accurate quote
LowestComponent sets the assembly rating
70°FBase temperature for published ratings
24/7/365On-call service and emergency support

The checklist

  1. Size. Nominal inside diameter.
  2. Length. Overall length and whether it is face to face, end to end or live length.
  3. Media. What flows through the hose, its concentration, and any cleaning or flushing chemicals.
  4. Pressure. Working, surge and test pressure, plus vacuum if any.
  5. Temperature. Normal and maximum, of both the media and the surroundings.
  6. Motion. Static, vibration, lateral offset, axial travel or constant flexing.
  7. End connections. Type, size, pressure class and material for each end.
  8. Paperwork. Test reports, MTRs, tagging or other documentation.

Size and length

Match the nominal ID to the pipe it connects. For length, tell us how it is measured. Overall length for a flanged assembly is usually face to face; for threaded or weld ends it is end to end. If the hose must absorb movement, its live (flexible) length matters too, and we can work it out from the motion details.

Media

The media drives the alloy of the corrugated core. Include concentration, whether it is aerated, and any cleaning chemicals, since a hose that handles the product can still fail from what it is flushed with. See the alloy selection guide for how 316L, 321, 304L, Monel 400, C276, 625 and bronze compare.

Pressure

Give working pressure, the highest surge or spike, and the test pressure you require. Pressure decides the hose series and the number of braid layers. A second braid layer typically raises working pressure about 1.6 times; see single vs double braid.

The weakest part sets the rating. The working pressure of an assembly is the lowest rating among hose, braid, fittings, welds and gaskets. A 2" double-braid 800-series hose listed at 1,296 psi is limited to 230 psi with a 316L Class 150 flange. Check the pressure rating chart.

Temperature

Published hose ratings are at 70°F and fall as temperature rises, as do flange and fitting ratings. High temperature can also change the alloy choice, for example toward 321 or 625.

Motion

Static hose can bend to its static bend radius. Hose that flexes in service needs the larger dynamic bend radius to protect fatigue life. Constant flexing and torsion favor annular hose over helical; see hose types. For thermal growth and settlement, an expansion loop or dog leg may be the better answer; see loops and dog legs.

End connections

  • ANSI/ASME flanges, fixed x floating
  • Male and female NPT
  • Butt-weld and socket-weld
  • JIC 37° flare
  • Cam & groove
  • Sanitary tri-clamp
  • Grooved
  • Unions and custom fittings

For each end give type, size, pressure class and material.

Paperwork

Every Patriot FTS assembly is pressure tested in our Youngsville shop. Test reports and MTRs are available on request; tell us up front what you need so it ships with the order. See our ISO 9001:2015 certificate details.

Send your details for a quote, or call (337) 573-4406.

Frequently asked questions

What information do I need to quote a metal hose?
Size, length, media, pressure, temperature, motion, end connections and any paperwork requirements.
How is metal hose length measured?
Flanged assemblies are usually measured face to face; threaded and weld-end assemblies end to end. Tell us which you used.
Why is my hose assembly rated lower than the hose?
Because the assembly is limited by its lowest-rated part, often a flange or fitting, and by temperature.
Do I need a different alloy for the braid and fittings?
Not necessarily. Each is a separate choice. If you need all components in one alloy, state it on the request.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.