Request a Quote (337) 573-4406 sales@patriotfts.com
Braided metal hose assemblies built by Patriot FTS in Louisiana

Home / Tech Reference / Live Length Calculator

Live Length and Bend Radius Calculator Size it to move.

Find the live length of a metal hose for lateral offset, angular bends and traveling loops with the industry-standard formulas and catalog bend radii. Free, no login.

Motion
Bend radius source
Catalog hose
Manual radius
End fittings (optional)

Patriot FTS Live Length Calculator

Result

Diagram

Schematic, not to scale. Ghosted hose shows the other end of travel.

Open in drawing generator

Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.

How the live length calculator works

Live length is the flexible part of the assembly between the end fittings. Too short and the hose is forced tighter than its minimum bend radius; too long and it can sag or snake. These are the standard formulas published across the metal hose industry.

Lateral offset

End free to move out of line: L = √(6RT + T²)
End held in line: L = √(20RT)
Projected length: Lp = √(L² − T²)

T is the travel from the neutral position. If the end moves to both sides of the centerline, use the total travel. For constant flexing, keep T at or below 25% of the dynamic bend radius; beyond that, use a traveling loop.

Angular bend

L = πRθ/180 + 2S

θ is the bend angle and S is the hose OD, allowed as a straight tangent at each end so the bend does not start at the fitting.

Traveling loops

Constant radius: L = 4R + T/2, H1 = 1.43R + T/2
Variable radius: L = 4R + 1.57T, H1 = 1.43R + 0.79T, H2 = 1.43R + 0.5T

T is the total travel and H is the hang length of the loop. Traveling loops use the minimum bend radius for constant flexing. The constant radius loop allows more movement; the variable radius loop needs less space.

Which bend radius

Use the static minimum bend radius when the hose is bent once at installation, and the dynamic radius when it flexes in service. See the installation and bend radius guide.

Frequently asked questions

What is live length?
The length of flexible hose between the end fittings. It does not include flanges, nipples or ferrules. Add the fitting lengths to get the overall length.
Why is offset travel limited to 25% of the bend radius?
Beyond that point the hose bends too sharply each cycle in lateral offset and service life drops quickly. Larger movements are better handled by a traveling loop or an expansion loop.
Should I round the live length?
Round up, not down. The calculator shows the length rounded up to the next half inch. Patriot FTS confirms the final length on the drawing and quote.
Can the hose twist in service?
No. Metal hose must never be installed with torsion, and motion should stay in the plane of the bend. Use swivel ends or flanges with floating rings to align without twisting.
Where does the bend radius come from?
From the catalog static and dynamic minimum bend radius for the size and construction you pick, or from the radius you enter.

Related tools and guides

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.