
Home / Tech Reference / Flex Service Screening
Metal Hose Flex Service Screening Find problems before the hose moves.
Check a metal hose in vibration or flexing service against catalog bend radii, pressure at temperature and the installation faults that cause early failure. Green, amber and red by factor. Free, no login.
Patriot FTS Flex Service Screening
Screening result
Installed bend against catalog radii
Factor by factor
Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.
How flex service screening works
Metal hose life in moving service depends on how far the hose bends, how often, at what pressure and temperature, and whether anything twists or pulls it. This tool does not predict a number of cycles. It checks each factor against catalog data and published industry practice and marks it green, amber or red, so problems show up before the hose is built.
- Bend radius. Static and vibration service compare the installed centerline radius with the catalog static bend radius. Intermittent and constant flexing compare it with the larger dynamic bend radius.
- Pressure and temperature. Operating pressure is compared with the catalog rating derated for braid temperature. Higher pressure and temperature shorten flex life.
- Installation faults. Torsion and axial movement are the most common causes of early metal hose failure and are always marked red. Multiplane motion, pulsation and external attack are marked for review.
- Velocity. If you enter a flow velocity, it is checked against the limits published across the metal hose industry for braided hose without a liner (see the flow velocity calculator).
Overall result = the worst single factor
A green result means nothing in your inputs conflicts with catalog limits. It is not a cycle-life rating. Live length, bend radius and movement capacity are confirmed by Patriot FTS at quote. To size the hose length for a known offset, use the live length calculator.
Frequently asked questions
How many cycles will my metal hose last?
What is the difference between static and dynamic bend radius?
Why is torsion always marked red?
Can metal hose take axial movement?
Does a green result guarantee the hose will work?
Related tools and guides
- Metal Hose Selector
- Live Length and Bend Radius Calculator
- Expansion Loop Sizer
- Assembly Rating Checker
- Hose Quote List Builder
- Spec Sheet Builder
- Installation Checker
- Inspection and Retest Planner
- Flow Velocity and Pressure Drop Calculator
- Media Compatibility Checker
- Pump Connector Sizer
- Fitting and Connection Finder
- Overall Length Calculator
- Saturated Steam Calculator
- Unit Converter
- Braid Burst Calculator
- Water Hammer Calculator
- Expansion Joint Quote Builder
- Metal hose live length calculator
- Installation and bend radius guide
Need it fast?
Call our on-call team any time, day or night, or send your specs online.
(337) 573-4406 Request a Quotesales@patriotfts.com