Request a Quote (337) 573-4406 sales@patriotfts.com
Large bore flanged metal hose assembly built by Patriot FTS in Louisiana

Home / Tech Reference / Assembly Rating Checker

Assembly Rating Checker Find the weak link.

Compare the hose, braid and end flange ratings at your design temperature on one chart and see which part governs the assembly rating. Free, no login.

Design conditions
Hose
End 1
End 2

Patriot FTS Assembly Rating Checker

Result

Ratings at design temperature

Pressure-temperature ratings

Component detail

Open in drawing generator

Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.

How the assembly rating checker works

A metal hose assembly is only as strong as its weakest part. The checker rates each part at your design temperature and shows which one governs.

  1. Hose and braid. Catalog working pressure at 70°F times the braid derating factor at temperature.
  2. Flanged ends. ASME B16.5 pressure-temperature rating for the class and material group, interpolated at your temperature.
  3. Other ends. Threaded, JIC, camlock, sanitary, grooved and weld ends depend on the fitting type, size and material. They are listed so you can see them, and Patriot FTS confirms their rating at quote.
  4. Compare. The lowest rating governs. The chart plots each curve against temperature with your design point.

Assembly rating = lowest of (hose and braid, End 1, End 2) at T
Hose and braid at T = rating at 70°F × braid factor at T

Carbon steel and low-temperature carbon steel flanges use the Group 1.1 table. 304/304L and 316/316L flanges use the Group 2.3 table, the conservative choice for low-carbon grades. Full tables are on the flange pressure rating chart and the metal hose pressure rating chart.

Frequently asked questions

Why is my hose rated higher than the assembly?
The hose and braid are often stronger than the flanges or threaded fittings on the ends, especially at high temperature where flange ratings fall. The lowest-rated part sets the assembly rating.
Which flange material table is used?
Carbon steel and A350 LF2 use ASME B16.5 Group 1.1. 304/304L and 316/316L use Group 2.3. These match the drawing generator.
Why are threaded and camlock ends not rated here?
Their ratings depend on the fitting type, size, material and manufacturer standard, so the tool does not assign a number. Patriot FTS confirms them on the quote.
Does the checker include test pressure?
No. It compares working ratings at temperature. Every Patriot FTS assembly is pressure tested before it ships, and test reports are available on request.
Can I open the result as a drawing?
Yes. Open in drawing generator carries the size, hose, braid, ends and design conditions into a straight assembly drawing.

Related tools and guides

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.