A class is not a pressure
An ASME B16.5 flange class (150, 300, 600, 900, 1500, 2500) is a pressure-temperature rating family, not a psi rating. The actual allowable pressure depends on the flange material group and the temperature. A Class 150 carbon steel flange is rated 285 psig at ambient temperature and only 140 psig at 600°F.
Ambient ratings by class (psig, −20 to 100°F)
| Class | Carbon steel (1.1) | 304 SS (2.1) | 316 SS (2.2) | 304L / 316L (2.3) |
|---|---|---|---|---|
| 150 | 285 | 275 | 275 | 230 |
| 300 | 740 | 720 | 720 | 600 |
| 600 | 1,480 | 1,440 | 1,440 | 1,200 |
| 900 | 2,220 | 2,160 | 2,160 | 1,800 |
| 1500 | 3,705 | 3,600 | 3,600 | 3,000 |
| 2500 | 6,170 | 6,000 | 6,000 | 5,080 |
Carbon steel, Group 1.1, vs temperature (psig)
| Temp °F | Class 150 | Class 300 | Class 600 |
|---|---|---|---|
| 100 | 285 | 740 | 1,480 |
| 200 | 260 | 680 | 1,360 |
| 300 | 230 | 655 | 1,310 |
| 400 | 200 | 635 | 1,265 |
| 500 | 170 | 605 | 1,205 |
| 600 | 140 | 570 | 1,135 |
| 650 | 125 | 550 | 1,100 |
| 700 | 110 | 530 | 1,060 |
| 750 | 95 | 505 | 1,015 |
| 800 | 80 | 410 | 825 |
| 900 | 50 | 230 | 460 |
| 1,000 | 20 | 85 | 170 |
Group 1.1 includes A105 forgings and A216 WCB castings. Prolonged use above 800°F is permissible but not recommended for carbon steel.
Stainless, Groups 2.1–2.3, vs temperature (psig)
| Temp °F | 150: 304 | 150: 316 | 150: L grades | 300: 304 | 300: 316 | 300: L grades |
|---|---|---|---|---|---|---|
| 100 | 275 | 275 | 230 | 720 | 720 | 600 |
| 200 | 230 | 235 | 195 | 600 | 620 | 510 |
| 300 | 205 | 215 | 175 | 540 | 560 | 455 |
| 400 | 190 | 195 | 160 | 495 | 515 | 420 |
| 500 | 170 | 170 | 150 | 465 | 480 | 395 |
| 600 | 140 | 140 | 140 | 440 | 450 | 370 |
Values through 600°F. Stainless flanges are rated above 600°F; ask us for ratings at higher temperatures.
Using the chart
- Find the material group of the flange itself, not the pipe or hose.
- Use your maximum design temperature. Linear interpolation between listed temperatures is permitted; extrapolation is not.
- Pick the lowest class whose rating is at or above your design pressure.
- Compare with the hose. The assembly working pressure is the lowest rating of the hose, braid, flange and weld at temperature. See the hose pressure chart.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

