Request a Quote (337) 573-4406 sales@patriotfts.com
Large-bore flanged braided metal hose assembly

Home / Products / End Configurations / Flanged Metal Hose

Flanged Metal Hose Assemblies Flanged ends, fixed or floating.

Braided metal hose with fixed or floating flanges for process piping and equipment tie-ins, fabricated and pressure tested in Youngsville, Louisiana.

Fixed × floatingEasier bolt-hole alignment
ASME B16.5Flange classes and faces
RF / FFRaised or flat face
24/7/365On-call service and emergency support

Why use flanged ends

Flanges are the standard connection for process piping, pumps, vessels and skids. A flanged hose bolts in and out without cutting or welding, which makes it easy to replace in a turnaround. We build flanged assemblies on 316L, 321 and special-alloy hose, in single or double braid.

Fixed vs floating flanges

StyleHow it worksBest for
FixedFlange is welded to the hose fitting and cannot turnOne end of most assemblies; plate flanges on pump connectors
Floating (lap joint)Loose backing flange rides on a stub end and rotates freelyLining up bolt holes without twisting the hose

Our most common arrangement is fixed × floating: one fixed flange and one rotating lap-joint flange. With a floating flange, the stub end makes the gasket face and contacts the media, while the backing flange only supplies bolting force. The backing flange can turn to meet the mating bolt pattern, so the hose is never twisted to line up holes. Torsion is one of the fastest ways to shorten metal hose life.

Flange faces

  • Raised face (RF). A raised ring concentrates bolt load on the gasket. It is the default for most process piping.
  • Flat face (FF). The whole face is flat and uses a full-face gasket. It is used against cast iron, bronze and FRP flanges, where a raised face could crack the mating flange.
Match the faces. Don't bolt a raised-face flange to a flat-face flange. Tell us what the hose mates to, and we'll match the face, class and bolt pattern.

Pressure class is not the assembly rating

An ASME Class 150 carbon steel flange is rated 285 psig at ambient temperature, falling to 140 psig at 600°F. The hose and braid may be rated higher or lower. The working pressure of the assembly is the lowest rating of the hose, braid, flange and weld at your temperature. See the flange pressure rating chart and the hose pressure chart.

Bolting and gaskets for the flange joint. Our sister company Patriot Bolt has free tools for the mating joint: a bolting list builder, a stud bolt length calculator, tightening patterns and gasket drawing generators.

What we need to quote a flanged hose

  • Hose size and overall length
  • Flange class, type and face for each end
  • Fixed, floating or both
  • Flange material
  • Media
  • Operating pressure and temperature
  • Movement or offset
  • Testing and documentation needs

See how to specify a metal hose assembly for the full checklist.

Frequently asked questions

What is a floating flange on a metal hose?
A lap-joint backing flange that rides on a stub end and rotates freely, so the bolt holes can be lined up without twisting the hose.
Can I bolt a raised-face flange to a flat-face flange?
No. Mismatched faces load the gasket unevenly and can crack a cast iron or bronze flange. Match the faces.
Is a 150# flanged hose rated for 150 psi?
Not necessarily. Class 150 is the flange class. The assembly rating depends on the hose, braid, flange material and temperature, and we confirm it on the quote.
What flange classes do you build?
We match the class, face and material your system calls for, within the rating of the hose. Tell us the mating flange and we confirm it on the quote.

Sources

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.