Request a Quote (337) 573-4406 sales@patriotfts.com
Braided metal hose with grooved pipe ends

Home / Products / End Configurations / Grooved-End Metal Hose

Grooved-End Metal Hose Assemblies Grooved ends, quick to install.

Braided metal hose with grooved pipe ends that connect to mechanical couplings for quick installation and service access, built and pressure tested in Youngsville, Louisiana.

GroovedMechanical coupling connection
Roll / cutGroove methods
AWWA C606Grooved joint standard
24/7/365On-call service and emergency support

What grooved ends are

A grooved end is a short pipe nipple with a groove formed near its end. A two-piece mechanical coupling, such as a Victaulic®-style coupling, wraps a gasket over the joint and keys into the grooves on both pipes. The joint goes together with a wrench in minutes, with no welding or flange bolting, and comes apart just as easily for service.

We build braided metal hose with grooved ends for utility piping, water service and skid connections, and offer grooved ends on our expansion loops.

Roll groove vs cut groove

MethodHow it's madeNotes
Roll grooveCold-formed into the pipe wall; no metal removedStandard and light-wall pipe
Cut grooveMachined into the pipe ODStandard wall or heavier pipe

Coupling makers publish the same pressure ratings for a coupling on roll- or cut-grooved standard-wall pipe. The difference is movement: with a flexible coupling, roll-grooved pipe allows about half the angular deflection and linear movement of cut-grooved pipe. Both methods meet ANSI/AWWA C606 when made to the coupling maker's dimensions.

Victaulic is a registered trademark of Victaulic Company. Patriot FTS is not affiliated with Victaulic.

Where grooved hose fits

  • Utility and plant water piping
  • Chilled and condenser water in HVAC systems
  • Pump and skid connections
  • Fire protection piping, where listed products may be required

Ratings

The coupling, gasket and grooved pipe each carry their own rating, set by the coupling manufacturer. The working pressure of the assembly is the lowest rating of the hose, braid, grooved end and coupling at your temperature. For fire sprinkler systems, state any UL or FM requirement on the request so we can confirm what can be supplied.

What we need

  • Pipe size and schedule
  • Groove standard and coupling brand/style
  • End material
  • Overall length
  • Media, pressure and temperature
  • Listings required

Frequently asked questions

What is the difference between roll and cut grooving?
Roll grooving cold-forms the groove without removing metal; cut grooving machines it into the pipe wall. Ratings are typically the same on standard-wall pipe, but cut grooves allow more movement with flexible couplings.
Do you supply the coupling?
Tell us the coupling brand and style you use. We build the grooved end to match and can quote couplings on request.
Are grooved hoses OK for fire sprinkler systems?
Fire protection systems may require UL listed or FM approved products. State the requirement and we will confirm before quoting.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.