Request a Quote (337) 573-4406 sales@patriotfts.com
Stainless braided hoses connecting chilled-water piping to a cooling unit

Home / Products / Data Center & Chilled Water / Data Center Cooling Hose

Data Center Cooling Hose and CDU Connections Liquid cooling, connected.

Flexible metal hose, expansion loops and fabricated connections for coolant distribution units, chillers and chilled-water risers, built and pressure tested in Youngsville, Louisiana.

CDUChiller and riser connections
BronzeAnd stainless construction
TaggedPressure tested before shipping
24/7/365On-call service and emergency support

Where flexible connections go

Liquid cooling puts water or a water-glycol coolant close to expensive equipment, and every rigid joint between moving parts is a place for stress to build up. Flexible connections take that stress out of the piping at the points where it collects:

  • CDU connections. Between the coolant distribution unit and the facility or rack-side piping.
  • Chiller connections. To isolate vibration and absorb misalignment at the chiller nozzles.
  • Riser expansion loops. To take up thermal growth in vertical chilled-water risers.
  • Seismic movement assemblies. Where piping crosses building joints or must move in an earthquake.
  • Prefabricated skids. Connections between prefabricated cooling skids, configured for your space.

Bronze or stainless

Match the hose to the pipe. Bronze hose and bronze loops suit copper piping. Stainless suits steel and stainless systems and higher pressures; see the alloy selection guide. Tell us the coolant and any inhibitor package so we can check compatibility.

Movement and vibration

Pumps and chillers vibrate, risers grow with temperature, and buildings move. Pump connectors handle vibration and small misalignment. Loops such as U-loops and V-loops handle larger thermal and seismic movement in several directions. The sizing guide explains how movement sets the loop size.

Testing and cleanliness

A leak in a data hall is expensive. Every assembly is pressure tested and tagged before it ships, and test reports and material traceability are available on request. Tell us about any cleaning, flushing, capping or packaging requirements and we will build them into the quote.

What we need

  • Location in the system
  • Pipe size and material
  • Coolant and temperature
  • Working and test pressure
  • Movement: thermal, seismic, vibration
  • End connections and lengths

Frequently asked questions

Should data center cooling connections be bronze or stainless?
Match the piping. Bronze suits copper systems, and stainless suits steel and stainless systems and higher pressures. Tell us the coolant so we can check compatibility.
Can you build seismic movement assemblies for chilled-water piping?
Yes. We build loops and flexible assemblies for thermal and seismic movement, sized from the movement in each direction.
Are data center assemblies pressure tested?
Yes. Every assembly is pressure tested and tagged before it ships. Test reports and material traceability are available on request.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.