
Home / Tech Reference / Saturated Steam Calculator
Saturated Steam Calculator Steam pressure in, hose answers out.
Look up saturation temperature, specific volume and enthalpy from gauge pressure, then check braided metal hose rating at that temperature and steam velocity in the hose. Free, no login.
Patriot FTS Saturated Steam Calculator
Result
Saturation curve
Catalog hose at saturation temperature
Braided constructions for this size and alloy, pressure rating derated to the saturation temperature.
Saturated steam table
Results are preliminary engineering estimates from catalog data and published industry formulas. Patriot FTS reviews every request and confirms hose construction, live length, ratings and movement capacity on the quote.
How the steam calculator works
Saturated steam has one temperature for each pressure. The tool looks up the saturation temperature, specific volume and enthalpy at your gauge pressure from a table built from the IAPWS-IF97 steam formulation, interpolating between rows. Then it checks the hose two ways.
- Rating at temperature. Each catalog braided construction for the size and alloy is derated to the saturation temperature with the braid temperature factors used across our tools, then compared with your steam pressure.
- Velocity. Mass flow times the vapor specific volume gives the actual volume flow, and dividing by the bore area gives velocity. Steam is checked against the gas limits for unlined braided hose published across the metal hose industry: 150 ft/s straight, 115 at 45°, 75 at 90° and 38 ft/s in a 180° bend.
v (ft/s) = (lb/hr × vg) ÷ (3600 × A)
A = π d² ÷ 4 ÷ 144 (d = nominal size, in.)
Latent heat hfg = hg − hf
Steam service is hard on hose. Condensate can collect in sagging loops and cause water hammer, and cycling temperature fatigues the corrugations. Route steam hose so it drains, avoid sharp bends near the fittings and see the steam hose guide for construction choices. Superheated steam is hotter than the saturation temperature for the same pressure; send the actual temperature with your request. Hose construction, ratings and dimensions are confirmed by Patriot FTS at quote.
Frequently asked questions
What temperature is 150 psig saturated steam?
Why is the hose rating lower for steam?
What is the velocity limit for steam in a metal hose?
Does the tool handle superheated steam?
Where do the steam properties come from?
Related tools and guides
- Metal Hose Selector
- Live Length and Bend Radius Calculator
- Expansion Loop Sizer
- Assembly Rating Checker
- Hose Quote List Builder
- Spec Sheet Builder
- Installation Checker
- Inspection and Retest Planner
- Flow Velocity and Pressure Drop Calculator
- Media Compatibility Checker
- Pump Connector Sizer
- Flex Service Screening
- Fitting and Connection Finder
- Overall Length Calculator
- Unit Converter
- Braid Burst Calculator
- Water Hammer Calculator
- Expansion Joint Quote Builder
- Steam hose guide
- Metal hose pressure rating chart
Need it fast?
Call our on-call team any time, day or night, or send your specs online.
(337) 573-4406 Request a Quotesales@patriotfts.com