Quick comparison
| Type | Construction | Strengths | Patriot FTS sizes |
|---|---|---|---|
| Annular corrugated | Parallel ring corrugations at right angles to the hose axis | Best flex life, easy to cut and weld, does not torque under pressure | 1/4" – 24" |
| Helical corrugated | One continuous corrugation like a screw thread | Drains liquid more easily; fully compressed helical can reach higher pressure in some lines | 1/4" – 1" (316 SS) |
| Interlocked (stripwound) | Preformed strip wound on a mandrel with adjacent edges folded together | Exhaust, dry bulk transfer, liner and armor | 1/2" – 28" (316 SS) |
Interactive: compare the three types
Move the slider to switch hose type, then raise the pressure to see how each construction behaves.
Annular corrugated hose
Annular hose has convolutions that line up parallel to one another, like a stack of rings. The parallel convolutions make annular hose easier to cut and weld, and published fatigue testing shows far better flexing characteristics than helical hose. In one dynamic cycling test, annular hose lasted almost 90% longer.
When pressurized, annular hose pushes outward along its axis rather than twisting. That makes it the default for braided pressure assemblies, expansion loops and pump connectors. Most of the series on our pressure rating chart are annular.
Helical corrugated hose
Helical hose has one continuous convolution, formed by a rotating die as the tube moves through it. Some users choose helical because liquid drains out of it more easily, and a fully compressed helical hose can reach higher working pressure than a standard-pitch annular hose in certain product lines.
Interlocked (stripwound) hose
Interlocked hose is made by helically winding preformed metal strip over a sizing mandrel and folding the adjacent edges together. The joints can move, which gives flexibility, but they are not welded, so interlocked hose is not a pressure hose in the way braided corrugated hose is. Packing can be wound into the joint to act as a continuous gasket and make some styles pressure tight.
- Exhaust hose for engines and hot gases.
- Dry bulk conveyor hose for powders and granules.
- Liner and armor inside or over corrugated hose assemblies for abrasion protection.
How to choose
- Pressure or vacuum service with liquids or gases? Use annular corrugated hose with braid.
- Constant flexing, vibration or torsion risk? Use annular.
- Small bore line that must drain? Consider helical.
- Exhaust, dry bulk or protective sleeve? Use interlocked.
Tell us the media, pressure, temperature and motion and we will recommend the construction. See how to specify a metal hose assembly.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.
