Request a Quote (337) 573-4406 sales@patriotfts.com
Patriot FTS tagged flanged metal hose assembly

Home / Tech Reference / FTS-TD-101

FTS-TD-101 · Metal Hose Pressure Ratings Working pressure by size and braid.

Maximum working pressure for braided annular corrugated stainless hose at 70°F, with bend radius and the rules for rating a complete assembly.

Patriot Fluid Transfer Solutions
FTS-TD-101REV A · NOVEMBER 2026

Metal Hose Pressure Ratings

Braided annular corrugated stainless hose · by series, size and braid

Maximum working pressure for braided annular corrugated stainless hose by series, size and braid layers. PSIG at 70°F, minimum 4:1 safety factor. 1B / 2B = one / two braid layers. A dash = no published rating.

P3 and P4 series PSIG at 70°F

Nom. IDP3 1BP3 2BP4 1BP4 2B
1/4"2,3602,8322,5003,375
5/16"1,6471,9762,3003,680
3/8"1,6391,9671,6802,700
1/2"1,2251,4701,2401,980
5/8"1,2001,440––
3/4"1,0341,2419401,500
1"7969556301,000
1-1/4"600720575920
1-1/2"557668500800
2"570684532850
2-1/2"––500700
3"––400600
4"––300444

Series guide

SeriesCharacter
P3Flexible, lightweight
P4Heavier wall
700Broad-use industrial
800Heavy wall
900Higher pressure, small sizes
1400Extreme pressure, 3–4 braids
P5Large diameter, 14"–24"

700, 800 and 900 series PSIG at 70°F

Nom. ID700 1B700 2B800 1B800 2B900 1B900 2B
1/4"2,1163,1252,5624,0992,7544,406
3/8"1,5012,4011,5012,4011,9213,073
1/2"1,0751,7202,1943,5102,1943,510
3/4"7921,2671,3112,0981,9943,192
1"5719141,0691,7101,5992,558
1-1/4"5318501,1101,7761,3172,107
1-1/2"4727558681,3881,0621,698
2"5168268101,2968421,346
2-1/2"387619578925––
3"316506540864––
3-1/2"297475––––
4"232371333533––
5"191306––––
6"165264266425––
8"234374234450––
10"230367––––
12"161257––––

1400 series Extreme pressure

Nom. IDBraidsWorking PSIGNom. burstBend R. dyn/stat, in.
1/2"34,00016,00014 / 7
3/4"35,00020,00015 / 7.5
1"34,20016,80016 / 8
1-1/2"32,75011,00024 / 12
2"32,1808,72040 / 20
3"31,2505,00084 / 32
4"41,2505,000112 / 52

P5 series Large diameter

Nom. IDBraidsWorking PSIGNom. burstBend R. dyn/stat, in.
14"115060072.5 / 38.5
16"111044081 / 44
18"18534090 / 49.5
20"16526099 / 55
22"150200107.5 / 60.5
24"145180114.5 / 66
Assembly rating
The working pressure of a complete assembly is the lowest of the hose, braid, end fittings, welds, gaskets and clamps, adjusted for temperature and service (pulsation, vibration, flexing, media). See FTS-TD-102 for fitting ratings.
Reading these tables
  • Temperature. Ratings are at 70°F. Hose, braid and fitting ratings all fall as temperature rises; hot service needs a derated pressure.
  • Bend radius. Static radius applies to hose bent once at installation. Dynamic radius applies to hose that flexes in service and is larger to protect fatigue life.
  • Test pressure. Test medium, pressure and hold time are set by the hose material, the application and the customer specification. Every Patriot FTS assembly is pressure tested and tagged by NDT Level II personnel before it ships.
  • Alloys. Series are available in 304, 316L and 321 stainless and, in specific series, Monel 400, Hastelloy C276 and Inconel 625. See FTS-TD-103.
Worked example
A 2" 800-series double-braid hose is rated 1,296 PSIG. Fitted with 316L Class 150 flanges, the assembly is limited to the flange rating of 230 psi at ambient temperature. Class 300 flanges raise the limit to 600 psi.
What to send for a quote
Nominal size and overall length · media and concentration · working, surge and test pressure · minimum and maximum temperature · end connections · movement or flexing · certificates and test reports required. Use the Hose Assembly Specification Worksheet, FTS-TD-105.
Patriot Fluid Transfer Solutions · 2809 Youngsville Hwy, Suite B, Youngsville, LA 70592
(337) 573-4406 · sales@patriotfts.com · patriotfts.com · ISO 9001:2015 · On call 24/7/365
Reference data for screening. Final assembly ratings and dimensions are confirmed by Patriot FTS at quote and on the test report.

Frequently asked questions

What do 1B and 2B mean on a metal hose pressure chart?
1B and 2B are one and two braid layers. Ratings in FTS-TD-101 are maximum working pressure in PSIG at 70°F with a minimum 4:1 safety factor. A dash means there is no published rating for that size.
Is the hose rating the same as the assembly rating?
No. A complete assembly is rated by its lowest component: hose, braid, end fittings, welds, gaskets and clamps, adjusted for temperature and service. For example, a 2" 800-series double-braid hose rated 1,296 PSIG with 316L Class 150 flanges is limited to the flange rating of 230 psi at ambient temperature. See FTS-TD-102 for fitting ratings.
What is the difference between static and dynamic bend radius?
Static radius applies to hose bent once at installation. Dynamic radius applies to hose that flexes in service and is larger to protect fatigue life.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.