Request a Quote (337) 573-4406 sales@patriotfts.com
Threaded pump connectors

Home / Products / Assembly Configurations / Threaded Pump Connectors

Threaded Flex Pump Connectors Stop vibration at the pump.

Threaded Pump Connectors built and pressure tested in Youngsville, Louisiana, 1/4" to 4" with male NPT ends in carbon steel, 304 or 316 stainless.

1/4" to 4"Size range
VibrationIsolates the pump
TestedEvery assembly
24/7/365On-call service

What a threaded pump connector does

A pump connector is a short braided metal hose assembly at the pump suction and discharge. It keeps vibration out of the piping and takes small lateral movement and minor misalignment. Our standard threaded pump connectors run 1/4" to 4" with male NPT ends in carbon steel, 304 or 316 stainless.

Standard sizes and lengths

VersionSizesLengths
Carbon steel MNPT1/4"–4"1/4–3/8": 6"; 1/2": 6-1/2"; 3/4": 7"; 1": 8"; 1-1/4": 8-1/2"; 1-1/2": 9"; 2": 10-1/2"; 2-1/2": 12"; 3": 14"; 4": 16". Also 12" for 1/2–2".
304 SS MNPT1/4"–4"12", 24" or 36"
316 SS MNPT1/2"–2"12"; 316L hose with 304L braid

Carbon steel threaded connectors use 321 hose and 304L braid. The 316 version is not an all-316 assembly; ask if you need 316 braid.

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

What a pump connector does not do

  • No axial compression or extension; use a metal expansion joint or a flexible loop.
  • No torsion; twisting shortens hose life sharply.
  • Not a fix for poor alignment or unsupported piping.

Installation tips

  • Install at natural length; braided hose grows about 1–2% under pressure.
  • Flex in one plane only.
  • Wrench only on the hex flats, with a backup wrench on the mating hex.
  • Anchor and support the piping so its weight does not hang on the connector.

Size it with the pump connector sizer. See also flanged pump connectors.

What we need

  • Pump nozzle size
  • End type and material
  • Media, pressure and temperature
  • Length or installed gap
  • Quantity
  • Test reports or MTRs needed

Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

Can a pump connector take axial movement?
No. Pump connectors handle vibration and small lateral offset. Use an expansion joint or loop for axial movement.
What pressure is it rated for?
It depends on size, hose, braid and temperature. Ratings and dimensions are confirmed by Patriot FTS at quote.
Do you supply test reports?
Yes, test reports and MTRs are available on request.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.