What a flanged pump connector does
A pump connector is a short braided metal hose assembly at the pump suction and discharge. It keeps vibration out of the piping and takes small lateral movement and minor misalignment. Our standard flanged pump connectors run 2" to 14" with 321 stainless hose, 304L stainless braid and Class 150 carbon steel plate flanges.
Standard sizes and lengths
| Nominal size | Overall length |
|---|---|
| 2"–4" | 9" |
| 5"–6" | 11" |
| 8" | 12" |
| 10" | 13" |
| 12"–14" | 14" |
Class 150 is the flange class, not the assembly rating. The working pressure depends on the hose, braid, size and temperature and is confirmed on the quote.
Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.
What a pump connector does not do
- No axial compression or extension; use a metal expansion joint or a flexible loop.
- No torsion; twisting shortens hose life sharply.
- Not a fix for poor alignment or unsupported piping.
Installation tips
- Install at natural length; braided hose grows about 1–2% under pressure.
- Flex in one plane only.
- Bolt up evenly without twisting the hose.
- Anchor and support the piping so its weight does not hang on the connector.
Size it with the pump connector sizer. See also threaded pump connectors.
What we need
- Pump nozzle size
- End type and material
- Media, pressure and temperature
- Length or installed gap
- Quantity
- Test reports or MTRs needed
Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

