What it handles
Our fuel transfer hose is rated for leaded, unleaded and lead-substitute fuels, diesel and low-pressure brake fluid, at up to 200 psi from 3/4" to 1". Common uses include equipment fueling and day-tank transfer.
Points to check
- Fuel type matters. Not every fuel hose suits gasoline. Some diesel and fuel oil hoses are rated not recommended for commercial gasoline. Tell us the exact fuel.
- Blends. Ethanol and biodiesel blends affect some tube compounds; some hoses are rated only up to a set blend, such as B20 biodiesel. Give us the blend.
- Static. Fuel flow can build static, so the hose needs a conductive path to the fittings and the fittings need grounding.
- Dispensers and listings. Retail fuel dispenser hose often has to carry a specific listing. If your application needs a listed hose, say so on the request and we will quote one that carries it.
What we need
- Fuel type and blend
- Size and length
- End fittings
- Pressure
- Indoor or outdoor use
- Any required listing
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
ToolSpec Sheet Builder (TD-105)Fill in the TD-105 specification online and get a clean one-page spec sheet to print, save or email
ToolHose Quote List BuilderList several assemblies with tags, sizes, ends and conditions, then send one request or download a CSV
ToolInspection and Retest PlannerKeep a hose register with retest due dates and fill in a TD-107 style inspection record
ToolUnit ConverterPressure, temperature, length, flow and more, plus an NPS to DN lookup
Browse all 62 Tech Reference itemsSee where this hose is used in the Markets Explorer
Ratings and dimensions are confirmed by Patriot FTS at quote.
Frequently asked questions
Can any fuel hose be used for gasoline?
No. Some fuel hoses are rated for diesel and fuel oil but not commercial gasoline. Check the hose rating for the exact fuel and blend.
What sizes of fuel transfer hose do you build?
We build fuel transfer assemblies from 3/4" to 1" at up to 200 psi. Larger petroleum transfer uses tank truck hose.
Do fuel hoses need grounding?
Fuel flow can build static. Use a hose with a conductive path and ground the system as your site procedures require.

