What it handles
Tank truck hose moves oil, fuels and other petroleum products between trucks, rail cars, tanks and bulk plants. It works in pressure, gravity-flow or suction service, so the same hose can unload a truck by pump or by gravity. We offer it in 150, 300 and 500 psi working pressures from 1-1/4" to 8".
Construction
A typical petroleum tank truck hose has a nitrile tube for oil resistance, textile or tire-cord plies, a steel helix to resist crushing and kinking, and an oil- and weather-resistant cover. Tank truck hose tubes are often ARPM Class A (high oil resistance), and makers rate them for a maximum aromatic content, commonly around 50% to 55%. Aromatic content varies by product, so tell us what you are moving.
Static and bonding
Fuels can build static as they flow. Petroleum hoses often carry a static wire, and the wire only works if it is connected to the couplings at both ends. If your hose needs a static wire, tell us and we will make sure it is connected to the fittings. Ground the truck and the hose as your site procedures require.
What we need
- Product and aromatic content
- Pressure rating needed
- Size and length
- End fittings
- Suction or pressure service
- Quantity
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

