Request a Quote (337) 573-4406 sales@patriotfts.com
Large-diameter hose with camlock couplings

Home / Products / End Configurations / Camlock Metal Hose

Camlock Metal Hose Assemblies Camlock ends for quick transfer.

Braided metal hose with cam-and-groove ends that connect and disconnect by hand for loading, unloading and maintenance work, built and pressure tested in Youngsville, Louisiana.

A–FStandard coupling types
A-A-59326Interchange specification
No toolsConnect and disconnect
24/7/365On-call service and emergency support

How camlocks work

A cam-and-groove coupling has two halves: a male adapter with a machined groove, and a female coupler with two cam arms. Push the adapter into the coupler, press the arms down, and the cams pull the adapter tight against a gasket. Lift the arms and it comes apart. No tools are needed, which is why camlocks are standard for loading, unloading, bulk transfer and temporary hookups.

Types A through F

TypeHalfOther end
AAdapter (male groove)Female thread
BCoupler (cam arms)Male thread
CCouplerHose shank
DCouplerFemale thread
EAdapterHose shank
FAdapterMale thread
DC / DPDust cap / dust plugClosed

Adapters (A, E, F) mate with couplers (B, C, D) of the same size. Parts made to Commercial Item Description A-A-59326, which replaced MIL-C-27487, interchange between manufacturers. There is no interchange standard for 1/2", 5" and 8" sizes.

Pressure ratings

SizeTypical rating (psi)
1/2"150
3/4"–2"250
2-1/2"150
3"125
4"100
5"–6"75
8"50

General screening values from our technical reference. Ratings vary by maker, material and temperature. On a metal hose, the camlock is often well below the hose rating, so it usually sets the assembly working pressure.

Cautions

  • Liquids, not compressed air or steam. Coupling makers commonly state cam-and-groove couplings are not suitable for compressed air or steam service.
  • Dust caps and plugs are not for pressure service.
  • Gasket first. The gasket is the seal, so match its material to the media.
  • Support the line. Don't let hose weight hang on the cam arms.

What we need

  • Hose size and length
  • Camlock type on each end
  • Coupling material
  • Gasket material
  • Media, pressure, temperature
  • Dust caps or plugs

Frequently asked questions

What do camlock types A through F mean?
The letter describes the half and its other end: A, E and F are male adapters; B, C and D are female couplers. A and D have female threads, B and F male threads, C and E hose shanks.
Can camlocks be used for steam or air?
Coupling makers commonly state cam-and-groove couplings are not suitable for compressed air or steam service. Use a threaded or flanged connection instead.
Do different brands of camlock fit together?
Parts made to A-A-59326 interchange in the same type and size, except some 1/2", 5" and 8" sizes, which have no interchange standard.

Sources

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.