Request a Quote (337) 573-4406 sales@patriotfts.com
Raised-face flange on a braided metal hose assembly

Home / Products / Assembly Configurations / Class 600 Flanged Hose

600# Flanged Flex Hose (Class 600) Class 600 flanges, matched to your piping.

Braided metal hose with ASME B16.5 Class 600 raised-face flanges, fixed or floating, fabricated and pressure tested in Youngsville, Louisiana.

Class 600ASME B16.5 pressure class
1,480psig, carbon steel at 100°F
1/2"–24"NPS range
24/7/365On-call service

What Class 600 means on a hose assembly

ASME B16.5 pressure classes set the bolt pattern, flange thickness and pressure-temperature rating of a pipe flange. A Class 600 flanged metal hose mates to Class 600 piping and equipment nozzles. At 100°F a Class 600 carbon steel flange is rated 1,480 psig and a 316 stainless flange 1,440 psig; the rating drops as temperature rises.

The flange rating is only one limit. The assembly is rated at the lowest of the hose, braid and flange at your operating temperature, so a Class 600 flange does not make the hose a Class 600 hose. The table below compares the highest catalog stainless hose rating at each size with the flange rating; check your exact construction with the assembly rating checker.

NPSHighest stainless hose rating, psig at 70°FClass 600 carbon steel flange, psig at 100°FLower of the two
1/24,0001,480Flange
3/45,0001,480Flange
14,2001,480Flange
1-1/42,1071,480Flange
1-1/22,7501,480Flange
22,1801,480Flange
2-1/29251,480Hose
31,2501,480Hose
3-1/24751,480Hose
41,2501,480Hose
53061,480Hose
64251,480Hose
85501,480Hose
103671,480Hose
122571,480Hose
141501,480Hose
161101,480Hose
18851,480Hose
20651,480Hose
22501,480Hose
24451,480Hose

Class 600 flange dimensions

Slip-on and weld neck flanges share these outside dimensions and bolt patterns. Weld neck flanges add a tapered hub.

NPSFlange ODThicknessRaised face dia.Bolt circleBoltsBolt size
1/23.75"0.56"1.38"2.63"41/2"
3/44.63"0.63"1.69"3.25"45/8"
14.88"0.69"2"3.5"45/8"
1-1/45.25"0.81"2.5"3.88"45/8"
1-1/26.13"0.88"2.88"4.5"43/4"
26.5"1"3.63"5"85/8"
2-1/27.5"1.13"4.13"5.88"83/4"
38.25"1.25"5"6.63"83/4"
3-1/29"1.38"5.5"7.25"87/8"
410.75"1.5"6.19"8.5"87/8"
513"1.75"7.31"10.5"81"
614"1.88"8.5"11.5"121"
816.5"2.19"10.63"13.75"121-1/8"
1020"2.5"12.75"17"161-1/4"
1222"2.63"15"19.25"201-1/4"
1423.75"2.75"16.25"20.75"201-3/8"
1627"3"18.5"23.75"201-1/2"
1829.25"3.25"21"25.75"201-5/8"
2032"3.5"23"28.5"241-5/8"
2234.25"3.75"25.25"30.63"241-3/4"
2437"4"27.25"33"241-7/8"

Class 600 pressure-temperature ratings

Maximum non-shock working pressure in psig for the material groups we commonly supply, per ASME B16.5.

TemperatureCarbon steel (Group 1.1)
100°F1,480
200°F1,360
300°F1,310
400°F1,265
500°F1,205
600°F1,135
650°F1,100
700°F1,060
750°F1,015
800°F825
900°F460
1000°F170

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

Flange types we build at Class 600

  • Raised-face slip-on flange
  • Raised-face weld neck flange

Flanges can be fixed on both ends, or one end can be a floating lap joint flange that rotates to line up bolt holes during installation. Flange facing is raised face unless you specify otherwise. See fixed x floating flange assemblies.

What we need

  • Hose size and overall length
  • Flange class, type and material
  • Fixed or floating flanges
  • Media, pressure and temperature
  • Movement or vibration
  • Test and documentation needs

Draw the assembly in the hose drawing generator and email it to Patriot FTS for a quote. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

Is a hose with Class 600 flanges rated to Class 600 pressure?
Not necessarily. The assembly is rated at the lowest of the hose, braid and flange ratings at temperature. Large hose sizes often rate below the flange. Ratings and dimensions are confirmed by Patriot FTS at quote.
Can one Class 600 flange float?
Yes. A lap joint flange on a stub end rotates freely so the bolt holes line up without twisting the hose. We commonly build one end fixed and one floating.
Which flange materials are available?
Carbon steel, 304/304L and 316/316L stainless, low-temperature carbon steel (A350 LF2), or material matched to the hose alloy.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.