Request a Quote (337) 573-4406 sales@patriotfts.com
Pallet of flanged braided metal hose assemblies

Home / Products / Assembly Configurations / Class 150 Flanged Hose

150# Flanged Flex Hose (Class 150) Class 150 flanges, matched to your piping.

Braided metal hose with ASME B16.5 Class 150 raised-face flanges, fixed or floating, fabricated and pressure tested in Youngsville, Louisiana.

Class 150ASME B16.5 pressure class
285psig, carbon steel at 100°F
1/2"–24"NPS range
24/7/365On-call service

What Class 150 means on a hose assembly

ASME B16.5 pressure classes set the bolt pattern, flange thickness and pressure-temperature rating of a pipe flange. A Class 150 flanged metal hose mates to Class 150 piping and equipment nozzles. At 100°F a Class 150 carbon steel flange is rated 285 psig and a 316 stainless flange 275 psig; the rating drops as temperature rises.

The flange rating is only one limit. The assembly is rated at the lowest of the hose, braid and flange at your operating temperature, so a Class 150 flange does not make the hose a Class 150 hose. The table below compares the highest catalog stainless hose rating at each size with the flange rating; check your exact construction with the assembly rating checker.

NPSHighest stainless hose rating, psig at 70°FClass 150 carbon steel flange, psig at 100°FLower of the two
1/24,000285Flange
3/45,000285Flange
14,200285Flange
1-1/42,107285Flange
1-1/22,750285Flange
22,180285Flange
2-1/2925285Flange
31,250285Flange
3-1/2475285Flange
41,250285Flange
5306285Flange
6425285Flange
8550285Flange
10367285Flange
12257285Hose
14150285Hose
16110285Hose
1885285Hose
2065285Hose
2250285Hose
2445285Hose

Class 150 flange dimensions

Slip-on and weld neck flanges share these outside dimensions and bolt patterns. Weld neck flanges add a tapered hub.

NPSFlange ODThicknessRaised face dia.Bolt circleBoltsBolt size
1/23.5"0.44"1.38"2.38"41/2"
3/43.88"0.5"1.69"2.75"41/2"
14.25"0.56"2"3.13"41/2"
1-1/44.63"0.63"2.5"3.5"41/2"
1-1/25"0.69"2.88"3.88"41/2"
26"0.75"3.63"4.75"45/8"
2-1/27"0.88"4.13"5.5"45/8"
37.5"0.94"5"6"45/8"
3-1/28.5"0.94"5.5"7"85/8"
49"0.94"6.19"7.5"85/8"
510"0.94"7.31"8.5"83/4"
611"1"8.5"9.5"83/4"
813.5"1.13"10.63"11.75"83/4"
1016"1.19"12.75"14.25"127/8"
1219"1.25"15"17"127/8"
1421"1.38"16.25"18.75"121"
1623.5"1.44"18.5"21.25"161"
1825"1.56"21"22.75"161-1/8"
2027.5"1.69"23"25"201-1/8"
2229.5"1.81"25.25"27.25"201-1/4"
2432"1.88"27.25"29.5"201-1/4"

Class 150 pressure-temperature ratings

Maximum non-shock working pressure in psig for the material groups we commonly supply, per ASME B16.5.

TemperatureCarbon steel (Group 1.1)304 stainless (Group 2.1)316 stainless (Group 2.2)304L / 316L stainless (Group 2.3)
100°F285275275230
200°F260230235195
300°F230205215175
400°F200190195160
500°F170170170150
600°F140140140140
650°F125–––
700°F110–––
750°F95–––
800°F80–––
900°F50–––
1000°F20–––

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

Flange types we build at Class 150

  • Raised-face slip-on flange
  • Raised-face weld neck flange
  • Raised-face plate flange
  • Lap joint (floating) flange with stub end

Flanges can be fixed on both ends, or one end can be a floating lap joint flange that rotates to line up bolt holes during installation. Flange facing is raised face unless you specify otherwise. See fixed x floating flange assemblies.

What we need

  • Hose size and overall length
  • Flange class, type and material
  • Fixed or floating flanges
  • Media, pressure and temperature
  • Movement or vibration
  • Test and documentation needs

Draw the assembly in the hose drawing generator and email it to Patriot FTS for a quote. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

Is a hose with Class 150 flanges rated to Class 150 pressure?
Not necessarily. The assembly is rated at the lowest of the hose, braid and flange ratings at temperature. Large hose sizes often rate below the flange. Ratings and dimensions are confirmed by Patriot FTS at quote.
Can one Class 150 flange float?
Yes. A lap joint flange on a stub end rotates freely so the bolt holes line up without twisting the hose. We commonly build one end fixed and one floating.
Which flange materials are available?
Carbon steel, 304/304L and 316/316L stainless, low-temperature carbon steel (A350 LF2), or material matched to the hose alloy.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.