Request a Quote (337) 573-4406 sales@patriotfts.com
Flanged braided metal hose spool with painted flanges

Home / Products / Assembly Configurations / Class 300 Flanged Hose

300# Flanged Flex Hose (Class 300) Class 300 flanges, matched to your piping.

Braided metal hose with ASME B16.5 Class 300 raised-face flanges, fixed or floating, fabricated and pressure tested in Youngsville, Louisiana.

Class 300ASME B16.5 pressure class
740psig, carbon steel at 100°F
1/2"–24"NPS range
24/7/365On-call service

What Class 300 means on a hose assembly

ASME B16.5 pressure classes set the bolt pattern, flange thickness and pressure-temperature rating of a pipe flange. A Class 300 flanged metal hose mates to Class 300 piping and equipment nozzles. At 100°F a Class 300 carbon steel flange is rated 740 psig and a 316 stainless flange 720 psig; the rating drops as temperature rises.

The flange rating is only one limit. The assembly is rated at the lowest of the hose, braid and flange at your operating temperature, so a Class 300 flange does not make the hose a Class 300 hose. The table below compares the highest catalog stainless hose rating at each size with the flange rating; check your exact construction with the assembly rating checker.

NPSHighest stainless hose rating, psig at 70°FClass 300 carbon steel flange, psig at 100°FLower of the two
1/24,000740Flange
3/45,000740Flange
14,200740Flange
1-1/42,107740Flange
1-1/22,750740Flange
22,180740Flange
2-1/2925740Flange
31,250740Flange
3-1/2475740Hose
41,250740Flange
5306740Hose
6425740Hose
8550740Hose
10367740Hose
12257740Hose
14150740Hose
16110740Hose
1885740Hose
2065740Hose
2250740Hose
2445740Hose

Class 300 flange dimensions

Slip-on and weld neck flanges share these outside dimensions and bolt patterns. Weld neck flanges add a tapered hub.

NPSFlange ODThicknessRaised face dia.Bolt circleBoltsBolt size
1/23.75"0.56"1.38"2.63"41/2"
3/44.63"0.63"1.69"3.25"45/8"
14.88"0.69"2"3.5"45/8"
1-1/45.25"0.75"2.5"3.88"45/8"
1-1/26.13"0.81"2.88"4.5"43/4"
26.5"0.88"3.63"5"85/8"
2-1/27.5"1"4.13"5.88"83/4"
38.25"1.13"5"6.63"83/4"
3-1/29"1.19"5.5"7.25"83/4"
410"1.25"6.19"7.88"83/4"
511"1.38"7.31"9.25"83/4"
612.5"1.44"8.5"10.63"123/4"
815"1.63"10.63"13"127/8"
1017.5"1.88"12.75"15.25"161"
1220.5"2"15"17.75"161-1/8"
1423"2.13"16.25"20.25"201-1/8"
1625.5"2.25"18.5"22.5"201-1/4"
1828"2.38"21"24.75"241-1/4"
2030.5"2.5"23"27"241-1/4"
2233"2.63"25.25"29.25"241-1/2"
2436"2.75"27.25"32"241-1/2"

Class 300 pressure-temperature ratings

Maximum non-shock working pressure in psig for the material groups we commonly supply, per ASME B16.5.

TemperatureCarbon steel (Group 1.1)304 stainless (Group 2.1)316 stainless (Group 2.2)304L / 316L stainless (Group 2.3)
100°F740720720600
200°F680600620510
300°F655540560455
400°F635495515420
500°F605465480395
600°F570440450370
650°F550–––
700°F530–––
750°F505–––
800°F410–––
900°F230–––
1000°F85–––

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

Flange types we build at Class 300

  • Raised-face slip-on flange
  • Raised-face weld neck flange
  • Raised-face plate flange
  • Lap joint (floating) flange with stub end

Flanges can be fixed on both ends, or one end can be a floating lap joint flange that rotates to line up bolt holes during installation. Flange facing is raised face unless you specify otherwise. See fixed x floating flange assemblies.

What we need

  • Hose size and overall length
  • Flange class, type and material
  • Fixed or floating flanges
  • Media, pressure and temperature
  • Movement or vibration
  • Test and documentation needs

Draw the assembly in the hose drawing generator and email it to Patriot FTS for a quote. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

Is a hose with Class 300 flanges rated to Class 300 pressure?
Not necessarily. The assembly is rated at the lowest of the hose, braid and flange ratings at temperature. Large hose sizes often rate below the flange. Ratings and dimensions are confirmed by Patriot FTS at quote.
Can one Class 300 flange float?
Yes. A lap joint flange on a stub end rotates freely so the bolt holes line up without twisting the hose. We commonly build one end fixed and one floating.
Which flange materials are available?
Carbon steel, 304/304L and 316/316L stainless, low-temperature carbon steel (A350 LF2), or material matched to the hose alloy.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.