Alloy 625 flanged hose assemblies
A Alloy 625 braided metal hose with raised-face flanges, fixed or floating, Class 150, 300 or 600. The hose alloy is chosen for the media and temperature; the end fittings are Alloy 625 to match the hose, or stainless or carbon steel where the media allows. See the Alloy 625 hose page for the alloy itself.
Sizes and catalog data
Alloy 625 flanged assemblies are offered from 1/2" to 8".
| Size | Braid | Hose, psig at 70°F | Tightest static bend | Flange (Class 150) |
|---|---|---|---|---|
| 1/2" | single, double | 1,075–1,720 | 1.5" | Class 150: 3.5" OD, 4 x 1/2" |
| 3/4" | single, double | 792–1,267 | 2.25" | Class 150: 3.88" OD, 4 x 1/2" |
| 1" | single, double | 571–914 | 2.75" | Class 150: 4.25" OD, 4 x 1/2" |
| 1-1/4" | single, double | 531–850 | 3.5" | Class 150: 4.63" OD, 4 x 1/2" |
| 1-1/2" | single, double | 472–755 | 4" | Class 150: 5" OD, 4 x 1/2" |
| 2" | single, double | 516–826 | 5" | Class 150: 6" OD, 4 x 5/8" |
| 2-1/2" | single, double | 387–619 | 8" | Class 150: 7" OD, 4 x 5/8" |
| 3" | single, double | 316–506 | 9" | Class 150: 7.5" OD, 4 x 5/8" |
| 4" | single, double | 232–371 | 13" | Class 150: 9" OD, 8 x 5/8" |
| 6" | single, double | 165–264 | 19" | Class 150: 11" OD, 8 x 3/4" |
| 8" | single, double | 234–374 | 20" | Class 150: 13.5" OD, 8 x 3/4" |
Published Alloy 625 braid derating factors
Multiply the 70°F rating by the factor at your temperature.
| Temperature | Factor |
|---|---|
| 70°F | 1.00 |
| 200°F | 0.96 |
| 400°F | 0.93 |
| 600°F | 0.93 |
| 800°F | 0.93 |
| 1000°F | 0.93 |
| 1200°F | 0.84 |
| 1500°F | 0.50 |
Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.
Where Alloy 625 is used
In the Patriot FTS TD-104 screening, Alloy 625 rates generally suitable for: fresh water, condensate; seawater, brackish water, chloride brines; nitric acid; phosphoric acid; sour gas, H2S; temperature above 400°F. Conditional: hydrochloric acid; sulfuric acid, dilute. Screening only; confirm with the media compatibility checker and your chemical supplier.
Other Alloy 625 configurations
- Alloy 625 threaded hose assembly
- Fixed x Floating Flange assembly
- Flange x Male NPT assembly
- Flange x Female NPT assembly
- Flange x NPT Union assembly
- Flange x Weld End assembly
- Flange x Grooved assembly
Inconel and Monel are registered trademarks of Special Metals Corporation; Hastelloy is a registered trademark of Haynes International. They are named here only to identify alloy grades. Patriot FTS is not affiliated with either company.
What we need
- Nominal size and overall length
- Both end connections and their material
- Hose alloy, or let us select
- Media, pressure and temperature
- Movement or vibration, if any
- Quantity, testing and documentation
Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.
