Request a Quote (337) 573-4406 sales@patriotfts.com
Alloy 625 threaded braided metal hose assemblies

Home / Products / Assembly Configurations / Alloy 625 Threaded

Inconel 625 Threaded Flexible Hose Alloy 625 hose, threaded ends.

Alloy 625 braided metal hose assemblies with raised-face flanges, fixed or floating, Class 150, 300 or 600, 1/4" to 4", fabricated and pressure tested in Youngsville, Louisiana.

Alloy 625Hose alloy
1/4"–4"Size range
3,125Max psig at 70°F, catalog
24/7/365On-call service

Alloy 625 threaded hose assemblies

A Alloy 625 braided metal hose with raised-face flanges, fixed or floating, Class 150, 300 or 600. The hose alloy is chosen for the media and temperature; the end fittings are Alloy 625 to match the hose, or stainless or carbon steel where the media allows. See the Alloy 625 hose page for the alloy itself.

Sizes and catalog data

Alloy 625 threaded assemblies are offered from 1/4" to 4".

SizeBraidHose, psig at 70°FTightest static bendThread
1/4"single, double2,116–3,1251"1/4-18 NPT
3/8"single, double1,501–2,4011.25"3/8-18 NPT
1/2"single, double1,075–1,7201.5"1/2-14 NPT
3/4"single, double792–1,2672.25"3/4-14 NPT
1"single, double571–9142.75"1-11.5 NPT
1-1/4"single, double531–8503.5"1-1/4-11.5 NPT
1-1/2"single, double472–7554"1-1/2-11.5 NPT
2"single, double516–8265"2-11.5 NPT
2-1/2"single, double387–6198"2-1/2-8 NPT
3"single, double316–5069"3-8 NPT
4"single, double232–37113"4-8 NPT

Published Alloy 625 braid derating factors

Multiply the 70°F rating by the factor at your temperature.

TemperatureFactor
70°F1.00
200°F0.96
400°F0.93
600°F0.93
800°F0.93
1000°F0.93
1200°F0.84
1500°F0.50

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

Where Alloy 625 is used

In the Patriot FTS TD-104 screening, Alloy 625 rates generally suitable for: fresh water, condensate; seawater, brackish water, chloride brines; nitric acid; phosphoric acid; sour gas, H2S; temperature above 400°F. Conditional: hydrochloric acid; sulfuric acid, dilute. Screening only; confirm with the media compatibility checker and your chemical supplier.

Other Alloy 625 configurations

Inconel and Monel are registered trademarks of Special Metals Corporation; Hastelloy is a registered trademark of Haynes International. They are named here only to identify alloy grades. Patriot FTS is not affiliated with either company.

What we need

  • Nominal size and overall length
  • Both end connections and their material
  • Hose alloy, or let us select
  • Media, pressure and temperature
  • Movement or vibration, if any
  • Quantity, testing and documentation

Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

What sizes are available in Alloy 625 with threaded ends?
1/4" through 4". Ratings and dimensions are confirmed by Patriot FTS at quote.
What pressure can a Alloy 625 threaded assembly handle?
232 to 3,125 psig at 70°F across these sizes in catalog data, before temperature derating and end fitting limits.
Can the end fittings be a different material from the hose?
Yes. Typical end fittings for Alloy 625 hose are Alloy 625 to match the hose, or stainless or carbon steel where the media allows. We confirm material at quote.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.