What a male NPT x NPT union assembly is
A male NPT nipple on one end and a female union on the other. The male end is made up first; the union then closes the joint without turning the hose.
Typical uses include threaded equipment connections that are removed for service, and anywhere a threaded hose must be installed without torsion. These are illustrative; your media, pressure, temperature and movement decide the build.
Sizes and catalog data
This configuration is offered from 1/4" to 3". The pressure range covers the stainless hose constructions at each size; the assembly is rated at the lowest of the hose, braid and both end fittings at your temperature.
| Size | Stainless hose, psig at 70°F | Tightest static bend | Male NPT | NPT union |
|---|---|---|---|---|
| 1/4" | 1,987–4,406 | 1" | 1/4-18 NPT | 1/4-18 NPT |
| 3/8" | 1,501–3,073 | 1" | 3/8-18 NPT | 3/8-18 NPT |
| 1/2" | 1,075–4,000 | 1.5" | 1/2-14 NPT | 1/2-14 NPT |
| 3/4" | 792–5,000 | 1.5" | 3/4-14 NPT | 3/4-14 NPT |
| 1" | 571–4,200 | 1.75" | 1-11.5 NPT | 1-11.5 NPT |
| 1-1/4" | 531–2,107 | 3.5" | 1-1/4-11.5 NPT | 1-1/4-11.5 NPT |
| 1-1/2" | 472–2,750 | 4" | 1-1/2-11.5 NPT | 1-1/2-11.5 NPT |
| 2" | 516–2,180 | 5" | 2-11.5 NPT | 2-11.5 NPT |
| 2-1/2" | 387–925 | 8" | 2-1/2-8 NPT | 2-1/2-8 NPT |
| 3" | 316–1,250 | 9" | 3-8 NPT | 3-8 NPT |
Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.
How overall length is measured
Overall length runs from the end of the male thread on one end to the face of the union on the other. Give the installed gap and we will set the hose live length so the assembly fits without stretching or compressing. The overall length calculator works it out from the end fittings.
Materials
Hose: 316L / 321 stainless, Alloy 625, Alloy C-276, Alloy 400 (Monel), Bronze. End fittings: carbon steel, 304/304L or 316/316L stainless, or matched to the hose alloy. Material availability by size is confirmed at quote.
Installation notes
- Do not twist the hose during installation; use the swivel, union or floating end to make up the last joint.
- Keep bends within the minimum bend radius and in one plane.
- Support the piping so its weight does not hang on the hose.
- See the installation and bend radius guide.
What we need
- Nominal size and overall length
- Both end connections and their material
- Hose alloy, or let us select
- Media, pressure and temperature
- Movement or vibration, if any
- Quantity, testing and documentation
Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

