Request a Quote (337) 573-4406 sales@patriotfts.com
Metal hose assembly with grooved end

Home / Products / Assembly Configurations / Flange x Grooved

Flanged x Grooved Flex Connectors Flange x grooved, built in Louisiana.

Braided metal hose assemblies with a raised-face flange (fixed) on one end and a grooved end on the other, 3/4" to 24", fabricated and pressure tested in Youngsville, Louisiana.

3/4"–24"Size range
5,000Max psig at 70°F, catalog
TestedEvery assembly
24/7/365On-call service

What a flange x grooved assembly is

A flange on one end and a grooved end on the other that connects to a mechanical grooved coupling. It bridges flanged equipment and grooved utility piping.

Typical uses include chilled and condenser water, utility water, pump skids and HVAC equipment with grooved piping. These are illustrative; your media, pressure, temperature and movement decide the build.

Sizes and catalog data

This configuration is offered from 3/4" to 24". The pressure range covers the stainless hose constructions at each size; the assembly is rated at the lowest of the hose, braid and both end fittings at your temperature.

SizeStainless hose, psig at 70°FTightest static bendFlangeGrooved
3/4"792–5,0001.5"Class 150: 3.88" OD, 4 x 1/2"1.05" pipe OD
1"571–4,2001.75"Class 150: 4.25" OD, 4 x 1/2"1.31" pipe OD
1-1/4"531–2,1073.5"Class 150: 4.63" OD, 4 x 1/2"1.66" pipe OD
1-1/2"472–2,7504"Class 150: 5" OD, 4 x 1/2"1.9" pipe OD
2"516–2,1805"Class 150: 6" OD, 4 x 5/8"2.38" pipe OD
2-1/2"387–9258"Class 150: 7" OD, 4 x 5/8"2.88" pipe OD
3"316–1,2509"Class 150: 7.5" OD, 4 x 5/8"3.5" pipe OD
3-1/2"297–47510"Class 150: 8.5" OD, 8 x 5/8"4" pipe OD
4"232–1,25013"Class 150: 9" OD, 8 x 5/8"4.5" pipe OD
5"191–30618"Class 150: 10" OD, 8 x 3/4"5.56" pipe OD
6"165–42519"Class 150: 11" OD, 8 x 3/4"6.62" pipe OD
8"234–55020"Class 150: 13.5" OD, 8 x 3/4"8.62" pipe OD
10"230–36725"Class 150: 16" OD, 12 x 7/8"10.75" pipe OD
12"161–25730"Class 150: 19" OD, 12 x 7/8"12.75" pipe OD
14"15038.5"Class 150: 21" OD, 12 x 1"14" pipe OD
16"11044"Class 150: 23.5" OD, 16 x 1"16" pipe OD
18"8549.5"Class 150: 25" OD, 16 x 1-1/8"18" pipe OD
20"6555"Class 150: 27.5" OD, 20 x 1-1/8"20" pipe OD
22"5060.5"Class 150: 29.5" OD, 20 x 1-1/4"22" pipe OD
24"4566"Class 150: 32" OD, 20 x 1-1/4"24" pipe OD

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

How overall length is measured

Overall length runs from the raised face of the flange on one end to the end of the grooved nipple on the other. Give the installed gap and we will set the hose live length so the assembly fits without stretching or compressing. The overall length calculator works it out from the end fittings.

Materials

Hose: 316L / 321 stainless, Alloy 625, Alloy C-276, Alloy 400 (Monel), Bronze. End fittings: carbon steel, 304/304L or 316/316L stainless, low-temperature carbon steel (A350 LF2) for flanges, or matched to the hose alloy. Material availability by size is confirmed at quote.

Installation notes

  • Do not twist the hose during installation; use the swivel, union or floating end to make up the last joint.
  • Keep bends within the minimum bend radius and in one plane.
  • Support the piping so its weight does not hang on the hose.
  • See the installation and bend radius guide.

What we need

  • Nominal size and overall length
  • Both end connections and their material
  • Hose alloy, or let us select
  • Media, pressure and temperature
  • Movement or vibration, if any
  • Quantity, testing and documentation

Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

What sizes are available as flange x grooved?
3/4" through 24". Ratings and dimensions are confirmed by Patriot FTS at quote.
What pressure is a flange x grooved assembly rated for?
Stainless hose at these sizes ranges from 45 to 5,000 psig at 70°F in catalog data. The end fittings and temperature can lower the assembly rating, which we confirm at quote.
How do I measure overall length?
From the raised face of the flange to the end of the grooved nipple.
Is every assembly tested?
Yes. Every assembly is pressure tested before it ships.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.