Request a Quote (337) 573-4406 sales@patriotfts.com
Large black water suction hose with flange and camlock ends

Home / Products / Industrial Utility Hose / Water Suction and Discharge Hose

Water Suction and Discharge Hose Suction, discharge or both.

Water suction and discharge hose for pumps, dewatering and plant water, plus PVC and high-pressure discharge hose, fitted and pressure tested in Youngsville, Louisiana.

3/4"–12"Suction and discharge sizes
Up to 250 psiHigh-pressure discharge
Vacuum ratedHelix-reinforced suction hose
24/7/365On-call service and emergency support

Our water hose range

HoseSizesTemp °FWorking pressureUse
Water suction and discharge3/4"–12"-40 to +180Up to 100 psiWhere a vacuum rating is needed
PVC water discharge1-1/4"–8"-40 to +120Up to 150 psiEconomical pump discharge
High-pressure water discharge1-1/2"–12"-40 to +180Up to 250 psiPremium pump discharge

Why suction needs a helix

On the suction side of a pump, the hose is under vacuum and will flatten unless something holds it open. Suction hose has a rigid helix, steel or PVC, built into the wall, and its rating includes a vacuum figure in inches of mercury. Published suction hoses commonly list about 28 to 29.8 in. Hg. Discharge-only hose has no helix, so it can’t be used for suction.

Picking the right hose

  • Pulling from a pit, tank or river: suction and discharge hose.
  • Moving water away from a pump on a budget: PVC discharge hose, within its lower temperature limit.
  • Long runs or higher head: high-pressure discharge hose.
  • Dirty water or slurry: tell us; abrasion changes the choice.

What we need

  • Suction, discharge or both
  • Size and length
  • Pressure and lift
  • Water temperature
  • End fittings
  • Solids or abrasives

Frequently asked questions

Can discharge hose be used for suction?
No. Discharge hose has no helix and will collapse under vacuum. Use a suction and discharge hose with a vacuum rating.
What does the vacuum rating on suction hose mean?
It is the vacuum the hose can hold without collapsing, usually in inches of mercury. Many suction hoses list around 28 to 29.8 in. Hg.
What is the difference between PVC and rubber discharge hose?
Our PVC discharge hose is an economical option to 120°F and 150 psi. Our high-pressure rubber discharge hose goes to 180°F and 250 psi.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.