What a flange x camlock assembly is
A flange on one end and a camlock adapter or coupler on the other. The flange stays bolted to the tank or piping while the camlock end gives a quick, tool-free connection for transfer hoses.
Typical uses include tank and frac-tank outlets, loading points, and process drains that connect to transfer hose. These are illustrative; your media, pressure, temperature and movement decide the build.
Sizes and catalog data
This configuration is offered from 1/2" to 6". The pressure range covers the stainless hose constructions at each size; the assembly is rated at the lowest of the hose, braid and both end fittings at your temperature.
| Size | Stainless hose, psig at 70°F | Tightest static bend | Flange | Camlock |
|---|---|---|---|---|
| 1/2" | 1,075–4,000 | 1.5" | Class 150: 3.5" OD, 4 x 1/2" | 1/2" camlock |
| 3/4" | 792–5,000 | 1.5" | Class 150: 3.88" OD, 4 x 1/2" | 3/4" camlock |
| 1" | 571–4,200 | 1.75" | Class 150: 4.25" OD, 4 x 1/2" | 1" camlock |
| 1-1/4" | 531–2,107 | 3.5" | Class 150: 4.63" OD, 4 x 1/2" | 1-1/4" camlock |
| 1-1/2" | 472–2,750 | 4" | Class 150: 5" OD, 4 x 1/2" | 1-1/2" camlock |
| 2" | 516–2,180 | 5" | Class 150: 6" OD, 4 x 5/8" | 2" camlock |
| 2-1/2" | 387–925 | 8" | Class 150: 7" OD, 4 x 5/8" | 2-1/2" camlock |
| 3" | 316–1,250 | 9" | Class 150: 7.5" OD, 4 x 5/8" | 3" camlock |
| 3-1/2" | 297–475 | 10" | Class 150: 8.5" OD, 8 x 5/8" | 3-1/2" camlock |
| 4" | 232–1,250 | 13" | Class 150: 9" OD, 8 x 5/8" | 4" camlock |
| 5" | 191–306 | 18" | Class 150: 10" OD, 8 x 3/4" | 5" camlock |
| 6" | 165–425 | 19" | Class 150: 11" OD, 8 x 3/4" | 6" camlock |
Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.
How overall length is measured
Overall length runs from the raised face of the flange on one end to the end of the camlock fitting on the other. Give the installed gap and we will set the hose live length so the assembly fits without stretching or compressing. The overall length calculator works it out from the end fittings.
Materials
Hose: 316L / 321 stainless, Alloy 625, Alloy C-276, Alloy 400 (Monel), Bronze. End fittings: carbon steel, 304/304L or 316/316L stainless, low-temperature carbon steel (A350 LF2) for flanges, or matched to the hose alloy. Material availability by size is confirmed at quote.
Installation notes
- Do not twist the hose during installation; use the swivel, union or floating end to make up the last joint.
- Keep bends within the minimum bend radius and in one plane.
- Support the piping so its weight does not hang on the hose.
- See the installation and bend radius guide.
What we need
- Nominal size and overall length
- Both end connections and their material
- Hose alloy, or let us select
- Media, pressure and temperature
- Movement or vibration, if any
- Quantity, testing and documentation
Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

