Request a Quote (337) 573-4406 sales@patriotfts.com
Hose assemblies with JIC swivel ends

Home / Products / Assembly Configurations / Female JIC x Female JIC

Stainless Braided Hose with Female JIC Fittings Female JIC x female JIC, built in Louisiana.

Braided metal hose assemblies with a female JIC 37° swivel on one end and a female JIC 37° swivel on the other, 1/4" to 2", fabricated and pressure tested in Youngsville, Louisiana.

1/4"–2"Size range
5,000Max psig at 70°F, catalog
TestedEvery assembly
24/7/365On-call service

What a female JIC x female JIC assembly is

Female JIC 37° swivels on both ends. Both ends turn, so the assembly can be installed and removed between two male JIC fittings with no torsion.

Typical uses include equipment and hydraulic connections, high-temperature lines where rubber hose is not suitable, and instrument tubing transitions. These are illustrative; your media, pressure, temperature and movement decide the build.

Sizes and catalog data

This configuration is offered from 1/4" to 2". The pressure range covers the stainless hose constructions at each size; the assembly is rated at the lowest of the hose, braid and both end fittings at your temperature.

SizeStainless hose, psig at 70°FTightest static bendFemale JIC
1/4"1,987–4,4061"-4 (7/16-20)
3/8"1,501–3,0731"-6 (9/16-18)
1/2"1,075–4,0001.5"-8 (3/4-16)
3/4"792–5,0001.5"-12 (1-1/16-12)
1"571–4,2001.75"-16 (1-5/16-12)
1-1/4"531–2,1073.5"-20 (1-5/8-12)
1-1/2"472–2,7504"-24 (1-7/8-12)
2"516–2,1805"-32 (2-1/2-12)

Values are catalog figures published across the metal hose industry, at 70°F unless noted. They are a starting point for selection, not a certification. Ratings and dimensions are confirmed by Patriot FTS at quote.

How overall length is measured

Overall length runs from the 37° seat of the swivel on one end to the 37° seat of the swivel on the other. Give the installed gap and we will set the hose live length so the assembly fits without stretching or compressing. The overall length calculator works it out from the end fittings.

Materials

Hose: 316L / 321 stainless, Alloy 625, Alloy C-276, Alloy 400 (Monel), Bronze. End fittings: carbon steel, 304/304L or 316/316L stainless, or matched to the hose alloy. Material availability by size is confirmed at quote.

Installation notes

  • Do not twist the hose during installation; use the swivel, union or floating end to make up the last joint.
  • Keep bends within the minimum bend radius and in one plane.
  • Support the piping so its weight does not hang on the hose.
  • See the installation and bend radius guide.

What we need

  • Nominal size and overall length
  • Both end connections and their material
  • Hose alloy, or let us select
  • Media, pressure and temperature
  • Movement or vibration, if any
  • Quantity, testing and documentation

Build this configuration in the hose drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

What sizes are available as female JIC x female JIC?
1/4" through 2". Ratings and dimensions are confirmed by Patriot FTS at quote.
What pressure is a female JIC x female JIC assembly rated for?
Stainless hose at these sizes ranges from 472 to 5,000 psig at 70°F in catalog data. The end fittings and temperature can lower the assembly rating, which we confirm at quote.
How do I measure overall length?
From the 37° seat of the swivel to the 37° seat of the swivel.
Is every assembly tested?
Yes. Every assembly is pressure tested before it ships.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.