Request a Quote (337) 573-4406 sales@patriotfts.com
Stainless steel U-loop expansion loop

Home / Products / Assembly Configurations / Butt-Weld U-Loop

Butt-Weld U-Loop Expansion Joints (Flexible Loops) Butt-weld ends, movement in every direction.

Flexible U-Loop expansion loops with weld end ends, built from 316 stainless braided hose and pressure tested in Youngsville, Louisiana.

U-LoopAssembly type
Weld EndEnd connection
X / Y / ZMovement
24/7/365On-call service

What a butt-weld U-Loop is

A U-loop is two parallel legs of braided metal hose joined by a 180° return, installed perpendicular to the pipe run. The legs flex in offset instead of being pushed or pulled along their axis, so the loop absorbs thermal growth, settlement and seismic movement in X, Y and Z with no pressure thrust.

Weld ends remove gasketed joints and suit permanent installations; field welding is needed to install and remove.

Construction

ComponentStandardOptions
Hose316 stainlessOther alloys for corrosive service
BraidStainless, single braidDouble braid for higher pressure or steam
Return180° return fittingSupport lug, drain or vent on request
EndsBeveled weld ends for butt welding into the pipingCustom ends to your drawing

Final dimensions, pressure rating and movement capacity are set during application review and confirmed on the quote.

Sizing the loop

Loop size depends on pipe size, the movement in each direction and the available space. Estimate thermal movement and loop dimensions with the expansion loop sizer and the TD-106 sizing guide, then send the result with your quote request.

Installation basics

  • Install between anchors, with the return free to move.
  • Support the return on larger loops with a hanger that lets it travel.
  • Support the arms in horizontal installations to prevent sag.
  • Do not twist the hose while making up the weld end ends.

Other U-Loop end options

What we need

  • Pipe size and schedule
  • End type and pressure class
  • Media, pressure and temperature
  • Movement in each direction
  • Orientation and available space
  • Quantity

Build this configuration in the U-loop drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.

Frequently asked questions

Why choose weld end ends on a U-Loop?
Weld ends remove gasketed joints and suit permanent installations; field welding is needed to install and remove.
How do I size a U-Loop?
Send pipe size, movement in each direction and available space, or estimate it with the expansion loop sizer. Final sizing is confirmed at quote.
Does a flexible loop create pressure thrust?
No. Unlike an unrestrained bellows expansion joint, a braided hose loop does not push the pipe apart under pressure.

Need it fast?

Call our on-call team any time, day or night, or send your specs online.

(337) 573-4406 Request a Quotesales@patriotfts.com
Designed. Fabricated. Tested. Delivered.  |  Built for performance. Built to last.