What a flanged dog-leg is
A dog-leg is two legs of braided metal hose joined by an elbow, installed where a pipe changes direction. Each leg takes the movement of the run it is perpendicular to, in lateral offset, so one assembly handles growth from two runs meeting at a corner without axial compression on the hose.
Why flanged ends
Flanged ends bolt to the piping and come apart for service, which suits larger lines and process connections. Making one flange a floating lap joint flange lets the bolt holes line up without twisting either leg.
We build 316 stainless dog-legs for offset runs and intersecting piping, and special-alloy dog-legs for corrosive media and elevated temperature. Each is developed from drawings and movement data.
Installation
- Flexing must stay in the plane of each leg.
- Do not twist the hose while bolting up.
- Anchor and guide the piping so the movement reaches the legs as intended.
What we need
- Pipe size and schedule
- Flange class and material
- Media, pressure and temperature
- Movement in each run
- Space and orientation
- Drawing or field sketch
Build this configuration in the dog leg drawing generator, then use Email to Patriot FTS for a quote, or send your specs. Ratings and dimensions are confirmed by Patriot FTS at quote.
From the Technical Reference
Tools for this job
Free tools you can use now, then email the result to Patriot FTS for a quote.
Ratings and dimensions are confirmed by Patriot FTS at quote.

